ALL ABOUT HARDWARE COSMETICS - TYPES OF PROCEDURES

Hardware for facial rejuvenation by electrophoresis

Hardware cosmetology offers a variety of facial treatments. In the photo before and after each treatment, you can see the differences, pros and cons as well as note the contraindications to using different skin rejuvenation methods. The methods of device contact with the skin involved in the 21st century have wide prospects, as they combine therapeutic properties with aesthetic efficacy.

Advantages of hardware aesthetics

A cosmetic procedure that uses devices that improve the shaping features of your face without the need for surgical intervention. Here are some advantages of the hardware aesthetic:

  • short recovery time after the procedure;
  • rejuvenating effects after 50 years of age;
  • ability to apply without additional anesthesia;
  • lacks wordy preliminary preparations;
  • simplicity of hardware effect methods;
  • improves skin;
  • applies familiar natural body contact elements;
  • a small number of contraindications;
  • Electric facial massage
  • not limited to age, popular method.

In physiotherapy, such effects are used in connection with natural processes in the body, such as muscle stimulation, UVB therapy, electrical stimulation, methods of high and low frequency magnetic fields, laser and ultrasonic projection. Many physiotherapy treatments are used in hardware aesthetics. They are combined with active nutrition and moisturizing for the skin and other cosmetic processes.

With the help of these devices, cosmetologists achieve a variety of effects - lifting muscles, correcting pigmentation, treating acne and irritation, cleansing and nourishing the skin, liftingoval facial musclesTo eliminate some defects, complex treatment is used with a number of cosmetic devices that have a different effect spectrum.

Fields of application of the device in aesthetics

After 40 years, some of its elasticity is lost on the skin.Toned facial skin after hardware techniquesCreams and care products, even the most premium ones, don't go deep into the skin. Cosmetic products can be penetrated further through hardware treatments. Hence, their application area is significantly increased. The skin's external parameters are improved, the aging process is slowed down significantly.

IMPORTANT: can good effect be achieved at home using cosmetic devices? There are devices for independent use. They are effective, even though they have low power and they need to be used for a long enough time to get the expected results.

Mesoporation (non-invasive mesotherapy), ultrasonic muscle lift, electrical stimulation are widely used for skin rejuvenation. To improve oval shape and improve muscle tone, people often use electromechanical stimulation. Other methods are used to eliminate a wide range of problems. For example, they are age spots, scars and wrinkles, wide pores, weak facial and neck muscles.

How hardware aesthetics can help:

  • makes the skin smooth, removes small wrinkles;
  • smoothes acne scars, smallpox scars and other blemishes;
  • improves skin tone, reduces sagging cheeks;
  • Vacuum cleaning
  • removes age spots;
  • remove unnecessary tattoos;
  • treats cellulite areas on the body until it disappears;
  • heals hair roots and scalp;
  • removes hair from the surface of the face and body;
  • heals the capillaries in the skin;
  • removes warts and papillomas.

Contraindications to the use of machine therapy include blood diseases, intolerance to certain substances or effects, certain genetic diseases, cancer, pregnancy. In any case, if you are in doubt about whether to use hardware cosmetic procedures, you should consult a specialist doctor.

Popular hardware beauty treatments

Hardware-tech cleaning and treatment procedures have emerged relatively recently. They are constantly improving, new devices appear.Before and after microcurrentsWe give you a brief overview of the most popular trends in hardware aesthetics.

Micro-flow facial therapy

According to research by European specialists, stimulating the skin with a weak electric current will increase the content of elastin in it by 40-50%, collagen - 10-12%. Due to the effect of an electric current on the inner layers of the epidermis, rapid division of cells occurs, providing them with additional nutrients due to an improved blood flow. The amount of chemical elements inside the skin cells increases. An increased oxygen supply occurs. After the treatment, the cream and mask are better absorbed. To achieve significant results in skin improvement with microcurrents, you should complete a full course of several courses. But even after the first session, the significant improvement in skin health parameters was noticeable.

Massage the hardware

In aesthetic aesthetics, a variety of hardware massages are used to improve the effectiveness of the skin, increase the tone, remove defects in the form of folds and cellulite formation. It is also actively used for weight loss and body contouring. This massage, in addition to an aesthetic function, also has remarkable healing properties.Before and after hardware massageBefore you self-massage or clean your skin, you must move the device along the massage line, each place no more than 2-3 minutes.

Avoid touching the device in areas with moles, papules, or inflamed areas. Massage machines often have different settings that can be set to desired mode. It depends on which area of ​​the body or face is being affected and for what purpose. Currently, massage machines such as lymphatic drainage, vacuum, vibration, and water are popular.

INFORMATION: the combination of massage and physical therapy gave rise to methods of improving skin parameters using the device. Hardware aesthetics include a variety of procedures for face and body, in photos you can see the skin before and after the treatment, notice the differences, pros and cons, pay attention to contraindications.

Some cosmetic massage designations:

  • weak skin tone, sagging cheeks;
  • cramps, muscle spasms;
  • presence of wrinkles;
  • puffiness under the eyes;
  • stretch skin;
  • cellulite, overweight.

Contraindications to such massage can be skin diseases, allergies, metabolic disorders. To be sure of the benefits of hardware massage procedures, you should consult a specialist and, if necessary, do a physical exam.

Darsonvalization

Darsonvalization

This method was originally used to stimulate blood circulation and metabolic processes in physiotherapy. Its name is derived from the surname of the French physicist and physiotherapist d'Arsonval. High-frequency alternating currents at high voltages are fed to the body parts through the glass tube. In cosmetology, this procedure has gained popularity due to its availability, few side effects, and simplicity.

Compact and quite effective device not only in beauty salon but also at home. With this device, you can quickly get rid of pimples, blemishes, and inflammatory pimples. It can also keep skin beautiful by promptly treating fine wrinkles, enlarged pores, and removing excess or dry oil. Such devices cope well with spider veins and skin regeneration. Under the action of high frequency currents, blood circulation is enhanced and metabolism in the skin is activated.

Facial muscle stimulation

Muscle stimulation can be done both in beauty salons and in cosmetology and at home. The device acts on the muscle with a series of electrical impulses (through electrodes in the skin). Muscle contractions stimulated by this device can be correlated with contractions during maximum exertion. This contributes to a dramatic increase in skin tension and smoothness. Usually, the following steps are needed to use the machine:

Myostimulation
  • cleanses the skin from cosmetics;
  • sets the required duration and intensity;
  • put electrodes on the face or body, they must be symmetrical;
  • turns on the operating mode of the device;
  • moves the electrode to the next section;
  • application of cosmetic products to care.

INFORMATION: The muscle stimulant is fixed on the desired part of the body and does not require manual manipulation, allowing you to do other things during the performance or just relax. Most muscle stimulants are battery-powered. There are a number of contraindications to their use, so it is advisable to consult a specialist first before starting use.

Microdermabrasion

This is a method of resurfacing the skin using abrasives. It is based on the ability of abrasive particles to penetrate the skin and exfoliate the keratinized areas of the skin. The micro particles of the abrasive grain have good penetrating properties. Exfoliation (resurfacing) frees space for further growth of skin tissue. Currently, the equipment uses two types of abrasives: diamond dust and aluminum dioxide. After treatment, remaining abrasive dust is removed by vacuum cleaner.

Cryotherapy

Cryotherapy

This is based on the body's response to cooling. After a short drastic drop in temperature, various hormones, including endorphins, adrenaline, are released into the skin, and immunity and blood supply increase. Currently at beauty salons, a number of different hardware cryotherapy methods are performed. Some of them are:

  • hardware cold spray: liquid nitrogen (from -180 to -50 degrees) is sprayed through a special device;
  • refrigerant electrophoresis: frozen chemicals are injected into the skin with electrical impulses;
  • cryochambers: cold gas chamber and nitrogen (-130 degrees) for the entire body.

Galvanotherapy

These devices are based on the use of low voltage (40-50mA) low voltage pulses. Its effect increases the content of histamine, serotonin and other active ingredients in the subcutaneous layer. In aesthetic technology, electrophoresis and sterilization devices are used. The first type of device transmits electrical current to the skin's surface through specialized attachments. It is used to treat couperosis, acne, melasma, and smooth facial wrinkles. The second type of equipment is designed for cleaning. It combines the use of alkaline solutions with the galvanizing process. Loosening of the skin contributes to deep fat dissolution and the removal of dead skin flakes.

Hardware extraction effect

Before and after peeling off hardware

Hardware trim, unlike manual cutting, allows you to achieve a youthful and fresh effect in less time. Types of skin peels use equipment that cleans and helps nourish all layers of the epidermis. The cleaning is deep and related to the cellular level. Devices for other purposes, for example, ultrasonic and laser liposuction devices, operate on the principle of tissue cleaning and excitation. These methods are used to remove excess weight, accumulated fat. A laser peel not only removes the upper layer of the epidermis, it enhances blood circulation and tightens muscles when exposed to light waves. Advanced laser resurfacing with fractional lasers, with very deep cleaning capabilities, practically harmless.

INFORMATION: The device type of procedures in aesthetic medicine, as opposed to the invasive, less complicated, more painless and non-traumatic type of use. It is perfect for those who advocate minimal intervention in the body's natural processes.

Has hardware for home use. In particular, the ultrasonic peeling machine cleans the skin, removes dead particles, thereby stimulating the metabolism and growth of new cells. With enlarged pores, they contribute to narrowing them. The result of the process is to increase the smoothness of the skin, changing its color to warmer and fresher shades. In addition, for household appliances, the nozzle mechanical and vacuum often peel off.Ultrasonic skin peelingMore complex types of skin peels are performed by specialists in beauty salons and cosmetic medicine centers.

Rejuvenation without surgery became available with the advent of hardware aesthetics. This field of aesthetic medicine is constantly offering exciting beauty programs. New equipment is being created, old ones are being improved taking into account modern technology. Many devices use a complex of several types of action at the same time: vacuum, ultrasound, electrical. For example, in a method such as lymph drainage. This process improves lymphatic movement, so edema is reduced, metabolism in the body is restored and blood circulation increases.

In hardware aesthetics, various types of high-tech devices are used, created specifically for facial tricks, its effectiveness confirmed through multiple photos before and after application. , the advantages of this method outweigh the disadvantages and have very few contraindications. Traditional beauty care products (creams or masks) combine with the latest technology for great results and help you look harmonious and youthful.